Concrete Raber GPR

Roof Engineers New Orleans & Houston

Roof engineers New Orleans can inspect and perform roof inspections on any roof system including concrete roofs, steel roofs, gravel and shingled roofs. After hurricanes, or natural disasters including lightening strikes the roof may get damaged. That is where we send our professional engineers and inspectors to do a thorough inspections of rooﬁng and intent of damages for insurance claim purpose and repairs. Our New Orleans roof engineers perform various structural rooﬁng inspections including initial tig-tag , in progress and final inspections for shingled, tile roofs. We also perform roof static uplift test TAS-105, TAS-106, Bell Chamber (TAS-124), Thermal Imaging etc. Various Services are performed and a Sealed and Signed report is prepared for the client.

We also perform structural roofing inspections for all shingle, metal & clay tile or concrete tile roofs as per Florida building code chapter 15. please call for our services.

Roof Engineers New Orleans Testing

EMA Roof Engineers inspectors performs detailed, professional visual inspections with state-of-the-art moisture detection devices and gives thorough explanations with digital pictures.

AFFI LLIATE D

Florida Registered Professional Engineer

Mississippi Professional Engineers

Louisiana Professional Engineers

TAS 106 – Uplift Resistance Testing Tile Roof

TAS 124 – Existing and New Roof Wind Uplift Resistance Testing

Special Inspectors Florida

SBCCI Building inspector

TAS 105 – Fastener Withdrawal Resistance Testing

TAS 109 – Polyurethane Foam Rooﬁng (pending certiﬁcation)

Poof Engineers New Orleans INSPECTION PROCEDURES

The starting point of the Inspection should be the interior of the building. The interior walls and ceilings should be checked for signs of water staining. After inspecting the interior a thorough inspection of the exterior walls should be made along with the roof system.

The following roof components should be inspected:

Flashing: These are the protection for the membrane termination and often provide a waterproof cover at the membrane termination. These include Counter- ﬂashing, expansion joint covers, copings and flashing at walls and curbs. A variety of problems may occur at these vulnerable locations.

Penetrations: These are pipes, drains, vents, stacks and other items that penetrate the roof membrane. These MUST be flashed properly to assure a watertight roof system.

Field Membrane — What to look for:

Open seams excessive blisters, wrinkles, ridges or areas of non-adhered membrane.
Worn spots holes or deteriorated areas of the membrane.
Deteriorated, areas of surface coating on the membrane.
Adequate, drainage and ponding problems of the membrane.
Areas around rooftop equipment that may have been degraded by leaks or spills or punctured by dropped equipment parts

5 best forensic engineers ft. lauderdale, best forensic engineers palm beach, best structrual engineers cocoa beach, best structural engineers tampa, best structural engineers daytona beach, best structural engineers jacksonville, best structural engineers orlando, building damage engineers & inspectors orlando, construction inspections orlando, construction inspectiosn tampa, ema structural engineers ft. lauderdale, ema structrual engineers orlando, forensic engineers cleannrater, foundation damage inspections jacksonville, foundation damage inspections orlando, ground penetration radar ft. lauderdale, ground penetration radarjacksonville, ground penetration radar miami, ground penetration radar tampa, roof engineers, roof engineers orlando, structrual engineers cleannrater, structural engineers palm bay, threshold inspectors clearwater, threshold inspectors orlando, threshold inspectors palm bay, threshold inspectors tampa