Our Licensed PE Engineers can provide structural damage inspections for the following cases
Structural Damage Inspections of Foundation
Structural damage inspections of masonry
Structural damage inspections for concrete & steel structures
structural damage roof & building inspections
Project construction structural inspections.
Hurricane damage structural Inspections
Special buildings structural Inspection
Quality Assurance Structural Inspections
Structural damage Inspections
Fire Damage Structural Inspections
Residential/Commercial Structural Inspections
Structural Sinkhole Inspections
Forensic damage Inspections of Buildings 8t Retaining Structures
Forensic Damage Inspections of Residential 8t Commercial Roofs
Hurricane related forensic damage Inspections
hurricane related Wind Damage Inspections
Forensic roof 8t Building Inspections
Forensic damage Inspections of Schools and other facilities
Forensic damage inspections to roofs and buildings due to fallen trees
Structural Framing Inspections
Structural Shoring Inspections
Structural damage Inspections
Structural forensic damage inspections are performed for insurance industry and adjusters to determine the cause, origin and damage to the rooﬁng elements as a result of high winds, hail and other hurricane related issues. No roof system can be expected to give long term perfomwance without some attention and maintenance. Too frequently, roofs are forgotten until a leak develops. Most problems begin in a small way and if left undetected, develop into a more expensive need for repairs, or in the extreme, need replacement of the roof.
Roof damage Inspections consists of the following elements:
Infrared Inspection: To pinpoint and identify moisture within the roof mat.
Roof Moisture Veriﬁcation: Infrared roof testing is performed to verify areas of moisture.
Observations and Findings: Results of the investigation.
Drawings: Location of infrared ﬁndings of additional suspected moisture.
The summary of infrared analysis and thermograms correspond to areas shown on drawings.
EMA Structural Forensic Roof Inspections Techniques include
1. Principles of Infrared
With the Infrared Thermography, roofs can be scanned with a highly sophisticated infrared camera to detect and accurately map sub-surface moisture, thereby detemﬁning whether a portion or all of the roof requires replacement. Unlike other non-destructive techniques, infrared themal scanning assesses every square inch of the rooﬁng including vertical ﬂashing. This results in a comprehensive view of the roof s condition with the possibility of error minimized.
The thermographic survey is conducted by hand canying the Infrared cameras over the roof.
Thermography or Infrared Scanning is based upon the ability of a specialized infrared camera to detect variations in temperature radiating from the roof surface and to convert them into an electrical signal which is displayed instantaneously as a video heat image called a Thermogram. The difference in tones (black to white) denotes variations in the roofs surface temperature of 0.2 degrees Centigrade, and is inﬂuence by the moisture content.
Every object whose surface temperature is above absolute zero (-2T3 degrees C.) radiates electromagnetic energy which is a function of its surface temperature. The intensity of this radiation varies along the wave lengths of the electromagnetic spectrum from visual to the infrared ranges. Using a highly sensitive, real time infrared imaging system, it is possible to observe, qualify and record the thermal picture of the object whose temperature is between -20 and +2000 Degrees C. The sensitivity of the equipment is such that it is capable of detecting temperatures between two given surfaces to an accuracy of .2 Degrees C. at an ambient temperature of 30 Degrees C. The heat picture, known as a Thermogram, is composed of a gray scale with continuous contrast ranging from black to white. Areas of higher temperature appear lighter while areas of lower temperature appear darker.
2. Charactieristicts of Moisture in Rooﬁng.
Infrared techniques pinpoint the moisture entry points from the interior, exterior, or from roof leaks. The absorption characteristics of various types of building materials are of particular interest. With porous material, moisture generally penetrates from the surface down; the greatest amount of water is found near the surface traveling along and dispersing into the porous material. In colder regions a potential condensation problem exists. The insulation is often protected by a vapor barrier located as near as practical to the warm side. As long as the vapor barrier is maintained at a temperature above the dew point, condensation can be completely forestalled. If water vapor can penetrate into the roof because of a poorly installed vapor barrier, it will migrate to the cold face, condense and often, be absorbed by the insulation or other absorbent materials.
The characteristics of various types of rooﬁng materials raises a similar interest. Different rooﬁng materials have varied moisture absorption characteristics. With porous material, moisture generally penetrates from the surface down. The greatest amount of water is found near the surface traveling along felts and dispersing into the insulation. The quantity of moisture, itsform, and location within the assembly, and the water absorption.
3. Technical Approach
When an abnormality on a Thermogram is identiﬁed as wet, (usually noted as a darker colored area), it is marked with paint and is photographed for future reference. The location of thi-area of sub-surface moisture is noted on the roof map which accompanies the report. Findings were not conﬁrmed by further tests.Under a clear sky during the day, the roof acts as a large themial collector and can approach 160 degrees Fahrenheit. Insulation laden with sub-surface moisture absorbs this radiation and acts as a reservoir to regenerate the heating of the membrane after the solar affect has dissipated. The affect of wet and dry material on the surface temperature of the roof is also a result of emissive cooling of the roof surface as much as 15 degrees Centigrade below ambient. In cooler weather, the introduction of moisture reduces the R-value of the assembly producing thermal bridges. These themal bridges are localized warm zones which also produce images on the Thermogram.
4. Interpreting Thermograms.
A Infrared Thermogram is a “temperature picture” of an object. Unlike ordinary photographic equipment that responds to visible light, the infrared camera responds only to invisible heat radiation. The resulting image produced on the display unit resembles the object in black and white with shades of gray. The whiter an object appears, the hotter it is. Conversely, the darker the cooler. In the color mode, the object being inspected with infrared equipment will show the wamest areas in white progressing through the spectrum to the coldest areas in blue.The sensitivity of the Thermographic equipment is such that temperature difference of as little as 0.2 degrees Centigrade, at an ambient temperature of 30 degrees Centigrade, is sensed.